0102030405
DTP-45 DC DC Diesel Transfer Pump
This fuel pump is smart pump,fueling the diesel,kerosene,not for gasoline.And its pump head with iron material,and with 100% copper line,its specification as follows:
● Available in 12 and 24 Voltage versions, provide with 3/4” threaded connectors on the pump body. Switch box and fuse carrier, reinforced base complete with power cables and pincers for connection to terminal strips.
● Cast iron pump body finished with anti-corrosion paint
● Vane pump with sintered steel rotor and acetal resin vane
● By-pass valve, pressure control valve and overload protector incorporated in the pump body
● Direct current brush motor with permanent magnet stator
● Motor protection class IP55
● Used in intermittent service with 30-minute work cycles
● Pump attachment support bracket
● IP54 protection;
● fuel pump with by pass and self priming;
● 4m delivery hose and 2m suction hose;
● filter or check valve
| Model | DTP-45 | |
| Flow Rate | 45L/min | |
| Power | RPM | 3600 |
| Voltage (V) | 12 VDC | |
| Power (W)* | 120 | |
| Full load current (A) | 2.0 | |
| Fuse | 1 25A fuse (Optional) | |
| Power cable length | 4m | |
| IPP code | IP 55 class B | |
| Weight | 5 kg | |
| Other features and accessories | Only for diesel fuel Do not use for/with gasoline and solvents with a flash point < 55°C. Comes with : - a metal fixing plate - 2 diameter plastic barbed fittings 19mm and 3/4" thread - 2 insulated crocodile clips (at the end of one 4m cable) | |
Fuse can option